CVE-2026-90348

Description

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: snoc: use memcpy_fromio() for MSA ramdump On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT). On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to it are not permitted. ath10k_msa_dump_memory() copies the region with a plain memcpy(), whose optimized __pi_memcpy_generic implementation issues wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in ath10k_snoc_fw_crashed_dump() while collecting the devcoredump: Unable to handle kernel paging request ... FSC=0x21: alignment fault pc : __pi_memcpy_generic lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc] The Oops both leaves the firmware RAM dump buffer zeroed (no dump is captured) and crashes the kernel, which in turn breaks modem SSR recovery. Use memcpy_fromio(), which only performs accesses that are valid for such a device-memory mapping. The generic memcpy_fromio() implementation aligns the source before issuing word-sized reads and stores the destination with put_unaligned(), so it is also safe for the coherent DMA allocation used on the non-reserved-memory path. ath11k and ath12k use the same pattern when copying target memory into crash dumps, so call it unconditionally here too. The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is needed; use __force to keep sparse happy. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1

Is your site exposed to CVE-2026-90348?

Run a free security scan — no signup, results in seconds.

EPSS — Exploit Prediction

0.0022

Probability of exploitation

0.12%

Percentile rank

EPSS estimates the probability that this vulnerability will be exploited in the wild within the next 30 days. A higher score means more likely to be exploited.

References

Other References

https://git.kernel.org/stable/c/045d1bfb72d2631ab9ec74afa491aa788ebb57aa https://git.kernel.org/stable/c/152e894e90716163c646d70f86b3afeb70442783 https://git.kernel.org/stable/c/4f25071afe9218aaae1c63fbf75e229aa6405319 https://git.kernel.org/stable/c/7039825a7479df637c4f5d546cb0e1cec18cd8e1 https://git.kernel.org/stable/c/838cab267ce9a975776e022f25094f8cbe1625d2 https://git.kernel.org/stable/c/e5bc3658da9c8a535e3fa5c0c875b2a456954e81 https://git.kernel.org/stable/c/eb946595a58decdb4cab1b5f3c972ae66f41f1c8 https://git.kernel.org/stable/c/fed1f662c9f9fd19eeab6c01966b7b5a33804420

Frequently Asked Questions

What is CVE-2026-90348? +

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: snoc: use memcpy_fromio() for MSA ramdump On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT). On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to it are not permitted. ath10k_msa_dump_memory() copies the region with a plain memcpy(), whose optimized __pi_memcpy_generic implementation issues wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in ath10k_snoc_fw_crashed_dump() while collecting the devcoredump: Unable to handle kernel paging request ... FSC=0x21: alignment fault pc : __pi_memcpy_generic lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc] The Oops both leaves the firmware RAM dump buffer zeroed (no dump is captured) and crashes the kernel, which in turn breaks modem SSR recovery. Use memcpy_fromio(), which only performs accesses that are valid for such a device-memory mapping. The generic memcpy_fromio() implementation aligns the source before issuing word-sized reads and stores the destination with put_unaligned(), so it is also safe for the coherent DMA allocation used on the non-reserved-memory path. ath11k and ath12k use the same pattern when copying target memory into crash dumps, so call it unconditionally here too. The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is needed; use __force to keep sparse happy. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1

How do I check if I'm vulnerable to CVE-2026-90348? +

You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.