CVE-2026-74655 (CVSS 8.8)

Description

In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1.

Is your site exposed to CVE-2026-74655?

Run a free security scan — no signup, results in seconds.

CVSS v3.1 Score

8.8

HIGH

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

EPSS — Exploit Prediction

0.0013

Probability of exploitation

0.03%

Percentile rank

EPSS estimates the probability that this vulnerability will be exploited in the wild within the next 30 days. A higher score means more likely to be exploited.

References

Other References

https://git.kernel.org/stable/c/1606abb7ce8c0cfef98c7e556b83c14e5d73c1bf https://git.kernel.org/stable/c/1c31e2377f4c1bb110ca7f6e597b2253a7440c37 https://git.kernel.org/stable/c/313ae287442e5e8d3f7b53b73f37d384bda072d0 https://git.kernel.org/stable/c/b1801c0d40f62778b613334de5840aba10a564d5 https://git.kernel.org/stable/c/e3c04834ae1ab5e9cfbe8ac54ec734aa4774249d

Frequently Asked Questions

What is CVE-2026-74655? +

In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1. It has a CVSS v3.1 base score of 8.8 (HIGH).

How severe is CVE-2026-74655? +

CVE-2026-74655 has a CVSS v3.1 score of 8.8 out of 10, rated HIGH. This is a high-severity vulnerability that should be prioritized for patching. The EPSS score is 0.0013, placing it in the 0th percentile for exploitation probability.

How do I check if I'm vulnerable to CVE-2026-74655? +

You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

CVE-2026-74655