CVE-2026-10679

LOW
Published Jul 21, 2026 CWE-369

Description

The DesignWare SPI driver (drivers/spi/spi_dw.c) computed the SPI BAUDR clock divider as info->clock_frequency / config->frequency without validating config->frequency. spi_transceive is a Zephyr __syscall and its verify handler (drivers/spi/spi_handlers.c) copies the caller-supplied spi_config from userspace without checking the frequency field, so a userspace thread that has been granted access to a DesignWare SPI device kernel object can pass frequency = 0 and trigger an unsigned integer divide-by-zero in spi_dw_configure(). On Cortex-M Mainline (SCB->CCR.DIV_0_TRP is set in z_arm_fault_init()) and on ARC (a dedicated __ev_div_zero vector) this raises a CPU exception, resulting in a kernel fault and local denial of service. The fix rejects zero frequency and frequencies above clock_frequency / 2 (the DesignWare SSI databook minimum SCKDIV of 2) with -EINVAL. The defect affects all Zephyr releases up to and including v4.4.0; exploitation requires CONFIG_USERSPACE=y and an unprivileged thread already granted SPI driver permission. There is no memory-corruption or information-disclosure impact.

Is your site exposed to CVE-2026-10679?

Run a free security scan — no signup, results in seconds.

CVSS v3.1 Score

3.3
LOW
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L

Weakness Type (CWE)

CWE-369 CWE-369

References

Frequently Asked Questions

What is CVE-2026-10679? +
The DesignWare SPI driver (drivers/spi/spi_dw.c) computed the SPI BAUDR clock divider as info->clock_frequency / config->frequency without validating config->frequency. spi_transceive is a Zephyr __syscall and its verify handler (drivers/spi/spi_handlers.c) copies the caller-supplied spi_config from userspace without checking the frequency field, so a userspace thread that has been granted access to a DesignWare SPI device kernel object can pass frequency = 0 and trigger an unsigned integer divide-by-zero in spi_dw_configure(). On Cortex-M Mainline (SCB->CCR.DIV_0_TRP is set in z_arm_fault_init()) and on ARC (a dedicated __ev_div_zero vector) this raises a CPU exception, resulting in a kernel fault and local denial of service. The fix rejects zero frequency and frequencies above clock_frequency / 2 (the DesignWare SSI databook minimum SCKDIV of 2) with -EINVAL. The defect affects all Zephyr releases up to and including v4.4.0; exploitation requires CONFIG_USERSPACE=y and an unprivileged thread already granted SPI driver permission. There is no memory-corruption or information-disclosure impact. It has a CVSS v3.1 base score of 3.3 (LOW).
How severe is CVE-2026-10679? +
CVE-2026-10679 has a CVSS v3.1 score of 3.3 out of 10, rated LOW. This is a low-severity vulnerability with limited impact.
How do I check if I'm vulnerable to CVE-2026-10679? +
You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Related Vulnerabilities

CVE-2025-4637

Divide By Zero vulnerability in davisking dlib allows remote attackers to cause a denial of service via a crafted file. …
CVE-2025-54873

RISC Zero is a zero-knowledge verifiable general computing platform based on zk-STARKs and the RISC-V microarchitecture. RISC packages risc0-zkvm versions …
CVE-2026-37232 8.6

An issue was discovered in OpenAirInterface5G 2.4.0 (nr-softmodem) in the E2SM-KPM RAN Function's PRB utilization metric calculation. The functions fill_RRU_PrbTotDl() …
CVE-2024-26945 8.4

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix nr_cpus < nr_iaa case If nr_cpus …
CVE-2024-4785 7.6

BT: Missing Check in LL_CONNECTION_UPDATE_IND Packet Leads to Division by Zero
CVE-2024-6135 7.6

BT:Classic: Multiple missing buf length checks

Don't wait for an exploit

Scan your website for vulnerabilities like CVE-2026-10679 — free, no signup required.