CVE-2026-10673: Out-of-bounds Read (CVSS 8.3)

Description

The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy.

Is your site exposed to CVE-2026-10673?

Run a free security scan — no signup, results in seconds.

CVSS v3.1 Score

8.3

HIGH

CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:H

EPSS — Exploit Prediction

0.0023

Probability of exploitation

0.14%

Percentile rank

EPSS estimates the probability that this vulnerability will be exploited in the wild within the next 30 days. A higher score means more likely to be exploited.

Weakness Type (CWE)

CWE-125 Out-of-bounds Read

CWE-787 Out-of-bounds Write

References

Other References

https://github.com/zephyrproject-rtos/zephyr/commit/158df8d088316cdae20816fc07703892280b2acb https://github.com/zephyrproject-rtos/zephyr/commit/c98321cbfef23c0e3bdf043ccf6b421067c8d508 https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hm6v-4jh4-3qc4 https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-hm6v-4jh4-3qc4

Frequently Asked Questions

What is CVE-2026-10673? +

The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. It has a CVSS v3.1 base score of 8.3 (HIGH).

How severe is CVE-2026-10673? +

CVE-2026-10673 has a CVSS v3.1 score of 8.3 out of 10, rated HIGH. This is a high-severity vulnerability that should be prioritized for patching. The EPSS score is 0.0023, placing it in the 0th percentile for exploitation probability.

How do I check if I'm vulnerable to CVE-2026-10673? +

You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Related Vulnerabilities

CVE-2026-29013

libcoap contains out-of-bounds read vulnerabilities in OSCORE Appendix B.2 CBOR unwrap handling where get_byte_inc() in src/oscore/oscore_cbor.c relies solely on assert() …

CVE-2026-53566

Out-of-bounds read vulnerability in Citrix Citrix Secure Access Client for Windows. This issue affects Citrix Secure Access Client for Windows: …

CVE-2026-3508

An Out-of-bounds Read vulnerability in the IOCTL handler in ASUS System Control Interface allows a local user to cause system …

CVE-2025-48520

An improper input validation vulnerability within the AMD Platform Management Framework (PMF) driver can allow a local attacker to read …

CVE-2026-3894

Out-of-bounds Read vulnerability in RTI Connext Professional (Core Libraries) allows Overread Buffers.This issue affects Connext Professional: from 7.4.0 before 7.7.0, …

CVE-2025-4098

Horner Automation Cscape version 10.0 (10.0.415.2) SP1 is vulnerable to an out-of-bounds read vulnerability that could allow an attacker to …

CVE-2026-10673