CVE-2025-39801: debian linux — Fix

Description

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Remove WARN_ON for device endpoint command timeouts This commit addresses a rarely observed endpoint command timeout which causes kernel panic due to warn when 'panic_on_warn' is enabled and unnecessary call trace prints when 'panic_on_warn' is disabled. It is seen during fast software-controlled connect/disconnect testcases. The following is one such endpoint command timeout that we observed: 1. Connect ======= ->dwc3_thread_interrupt ->dwc3_ep0_interrupt ->configfs_composite_setup ->composite_setup ->usb_ep_queue ->dwc3_gadget_ep0_queue ->__dwc3_gadget_ep0_queue ->__dwc3_ep0_do_control_data ->dwc3_send_gadget_ep_cmd 2. Disconnect ========== ->dwc3_thread_interrupt ->dwc3_gadget_disconnect_interrupt ->dwc3_ep0_reset_state ->dwc3_ep0_end_control_data ->dwc3_send_gadget_ep_cmd In the issue scenario, in Exynos platforms, we observed that control transfers for the previous connect have not yet been completed and end transfer command sent as a part of the disconnect sequence and processing of USB_ENDPOINT_HALT feature request from the host timeout. This maybe an expected scenario since the controller is processing EP commands sent as a part of the previous connect. It maybe better to remove WARN_ON in all places where device endpoint commands are sent to avoid unnecessary kernel panic due to warn.

Is your site exposed to CVE-2025-39801?

Run a free security scan — no signup, results in seconds.

CVSS v3.1 Score

5.5

MEDIUM

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Weakness Type (CWE)

CWE-617 CWE-617

Affected Products

Vendor	Product	Versions
linux	linux_kernel	3.2 — 5.15.190
linux	linux_kernel	5.16 — 6.1.149
linux	linux_kernel	6.2 — 6.6.103
linux	linux_kernel	6.7 — 6.12.44
linux	linux_kernel	6.13 — 6.16.4
linux	linux_kernel	All
linux	linux_kernel	All
debian	debian_linux	All

References

Advisories & Patches

https://git.kernel.org/stable/c/45eae113dccaf8e502090ecf5b3d9e9b805add6f https://git.kernel.org/stable/c/5a1a847d841505dba2bd85602daf5c218e1d85b8 https://git.kernel.org/stable/c/84c95dbf5bece56086cdb65a64162af35158bdd9 https://git.kernel.org/stable/c/db27482b9db340402e05d4e9b75352bbaca51af2 https://git.kernel.org/stable/c/dfe40159eec6ca63b40133bfa783eee2e3ed829f https://git.kernel.org/stable/c/f49697dfba2915a9ff36f94604eb76fa61413929

Other References

https://lists.debian.org/debian-lts-announce/2025/10/msg00008.html https://cert-portal.siemens.com/productcert/html/ssa-032379.html

Frequently Asked Questions

What is CVE-2025-39801? +

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Remove WARN_ON for device endpoint command timeouts This commit addresses a rarely observed endpoint command timeout which causes kernel panic due to warn when 'panic_on_warn' is enabled and unnecessary call trace prints when 'panic_on_warn' is disabled. It is seen during fast software-controlled connect/disconnect testcases. The following is one such endpoint command timeout that we observed: 1. Connect ======= ->dwc3_thread_interrupt ->dwc3_ep0_interrupt ->configfs_composite_setup ->composite_setup ->usb_ep_queue ->dwc3_gadget_ep0_queue ->__dwc3_gadget_ep0_queue ->__dwc3_ep0_do_control_data ->dwc3_send_gadget_ep_cmd 2. Disconnect ========== ->dwc3_thread_interrupt ->dwc3_gadget_disconnect_interrupt ->dwc3_ep0_reset_state ->dwc3_ep0_end_control_data ->dwc3_send_gadget_ep_cmd In the issue scenario, in Exynos platforms, we observed that control transfers for the previous connect have not yet been completed and end transfer command sent as a part of the disconnect sequence and processing of USB_ENDPOINT_HALT feature request from the host timeout. This maybe an expected scenario since the controller is processing EP commands sent as a part of the previous connect. It maybe better to remove WARN_ON in all places where device endpoint commands are sent to avoid unnecessary kernel panic due to warn. It has a CVSS v3.1 base score of 5.5 (MEDIUM).

How severe is CVE-2025-39801? +

CVE-2025-39801 has a CVSS v3.1 score of 5.5 out of 10, rated MEDIUM. This is a medium-severity vulnerability that should be remediated as part of regular maintenance.

What products are affected by CVE-2025-39801? +

CVE-2025-39801 affects products from debian, linux, specifically: debian_linux, linux_kernel. Check the affected products table above for specific version ranges.

How do I check if I'm vulnerable to CVE-2025-39801? +

You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Related Vulnerabilities

CVE-2025-4321

In a Bluetooth device, using RS9116-WiseConnect SDK experiences a Denial of Service, if it receives malformed L2CAP packets, only hard …

CVE-2025-34458

wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 3658a87, contain a reachable assertion vulnerability in the …

CVE-2026-29116

A vulnerability has been found in some Dahua products could allow an unauthenticated remote attacker to send a specially crafted …

CVE-2026-35058

Improper validation of packet length during tls-crypt-v2 key extraction in OpenVPN 2.6.0 through 2.6.19 and 2.7_alpha1 through 2.7.1 allows authenticated …

CVE-2026-29115

A vulnerability has been found in some Dahua products could allow an authenticated remote attacker to send a specially crafted …

CVE-2026-13058

An authenticated user with basic write privileges can cause the mongod process to terminate abnormally by sending a crafted transaction …

CVE-2025-39801