CVE-2024-50038: linux kernel — Fix

Description

In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: avoid NFPROTO_UNSPEC where needed syzbot managed to call xt_cluster match via ebtables: WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780 [..] ebt_do_table+0x174b/0x2a40 Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet processing. As this is only useful to restrict locally terminating TCP/UDP traffic, register this for ipv4 and ipv6 family only. Pablo points out that this is a general issue, direct users of the set/getsockopt interface can call into targets/matches that were only intended for use with ip(6)tables. Check all UNSPEC matches and targets for similar issues: - matches and targets are fine except if they assume skb_network_header() is valid -- this is only true when called from inet layer: ip(6) stack pulls the ip/ipv6 header into linear data area. - targets that return XT_CONTINUE or other xtables verdicts must be restricted too, they are incompatbile with the ebtables traverser, e.g. EBT_CONTINUE is a completely different value than XT_CONTINUE. Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as they are provided for use by ip(6)tables. The MARK target is also used by arptables, so register for NFPROTO_ARP too. While at it, bail out if connbytes fails to enable the corresponding conntrack family. This change passes the selftests in iptables.git.

Is your site exposed to CVE-2024-50038?

Run a free security scan — no signup, results in seconds.

CVSS v3.1 Score

5.5

MEDIUM

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Affected Products

Vendor	Product	Versions
linux	linux_kernel	2.6.30 — 5.15.168
linux	linux_kernel	5.16 — 6.1.113
linux	linux_kernel	6.2 — 6.6.57
linux	linux_kernel	6.7 — 6.11.4
linux	linux_kernel	All
linux	linux_kernel	All

References

Advisories & Patches

https://git.kernel.org/stable/c/0bfcb7b71e735560077a42847f69597ec7dcc326 https://git.kernel.org/stable/c/4cdc55ec6222bb195995cc58f7cb46e4d8907056 https://git.kernel.org/stable/c/85ff9a0f793ca52c527e75cd40a69c948627ebde https://git.kernel.org/stable/c/8f482bb7e27b37f1f734bb9a8eeb28b23d59d189 https://git.kernel.org/stable/c/997f67d813ce0cf5eb3cdb8f124da68141e91b6c

Other References

https://lists.debian.org/debian-lts-announce/2025/01/msg00001.html

Frequently Asked Questions

What is CVE-2024-50038? +

In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: avoid NFPROTO_UNSPEC where needed syzbot managed to call xt_cluster match via ebtables: WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780 [..] ebt_do_table+0x174b/0x2a40 Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet processing. As this is only useful to restrict locally terminating TCP/UDP traffic, register this for ipv4 and ipv6 family only. Pablo points out that this is a general issue, direct users of the set/getsockopt interface can call into targets/matches that were only intended for use with ip(6)tables. Check all UNSPEC matches and targets for similar issues: - matches and targets are fine except if they assume skb_network_header() is valid -- this is only true when called from inet layer: ip(6) stack pulls the ip/ipv6 header into linear data area. - targets that return XT_CONTINUE or other xtables verdicts must be restricted too, they are incompatbile with the ebtables traverser, e.g. EBT_CONTINUE is a completely different value than XT_CONTINUE. Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as they are provided for use by ip(6)tables. The MARK target is also used by arptables, so register for NFPROTO_ARP too. While at it, bail out if connbytes fails to enable the corresponding conntrack family. This change passes the selftests in iptables.git. It has a CVSS v3.1 base score of 5.5 (MEDIUM).

How severe is CVE-2024-50038? +

CVE-2024-50038 has a CVSS v3.1 score of 5.5 out of 10, rated MEDIUM. This is a medium-severity vulnerability that should be remediated as part of regular maintenance.

What products are affected by CVE-2024-50038? +

CVE-2024-50038 affects products from linux, specifically: linux_kernel. Check the affected products table above for specific version ranges.

How do I check if I'm vulnerable to CVE-2024-50038? +

You can use Secably's free Website Scanner to check your website for known vulnerabilities. For infrastructure scanning, use the Port Scanner to identify exposed services that may be affected. Check the vendor advisories linked above for specific patch and version information.

Related Vulnerabilities

CVE-2025-9588 10.0

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Iron Mountain Archiving Services Inc. …

CVE-2025-57870 10.0

A SQL Injection vulnerability exists in Esri ArcGIS Server versions 11.3, 11.4 and 11.5 on Windows, Linux and Kubernetes. This …

CVE-2026-48286 10.0

Adobe Campaign Classic (ACC) versions 7.4.3 build 9396 and earlier are affected by an Incorrect Authorization vulnerability that could result …

CVE-2026-13782 10.0

Use after free in Browser in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer …

CVE-2026-48449 10.0

Adobe Campaign Classic (ACC) is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the …

CVE-2026-48303 10.0

Adobe Campaign Classic (ACC) versions 7.4.3 build 9394 and earlier are affected by an Incorrect Authorization vulnerability that could result …

CVE-2024-50038